|
| 用查表法求插齿刀齿顶强度对变位系数的限制 |
| Solution to the Restraint Gear Shapper Addendum Strength to the Profile Shafted Coefficient by Charting Method |
| |
| DOI：10.3969/j.issn.1671-5322.2002.02.020 |
| 中文关键词: 齿顶宽度 最大变位系数 对照表 |
| 英文关键词: Addendum Width the maximum profile shafted coefficient the table of contrast |
| 基金项目: |
|
| 摘要点击次数: 4580 |
| 全文下载次数: 3734 |
| 中文摘要: |
| 插齿刀变位系数加大,则其齿顶强度降低.欲保证其齿顶强度,需求出所允许的最大变位系数x0max.如采用作图法求x0max则过于粗糙,采用试算法则太麻烦.通过应用齿顶宽度与齿数、模数及变位系数之关系进行计算作出详细表格,读者根据插齿刀的模数、齿数、齿高系数即可得到x0max. |
| 英文摘要: |
| With the increasing of the profile shafted coefficient of gear shaper, the addendum strength will decrease. To ensure the addendum strength, the maximum profile shaft caefficient is needed to be obtained. It will be rough by drawing method or will be inconuenient by trial method. The author has calculated according to the relationship among addendum width, gear tooth number, module and profile shafted cofficient and designed a detailed fable. X omax can be quickly obtained in terms of the module, tooth number and coefficient of gear height of gear shaper. And a good result can be obtained from proutical applications. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |