|
| 二氧化锆陶瓷插芯内孔研磨实验研究 |
| LABORATORIAL RESEARCHING ON GRINDING Empirical Study of ZrO2 Ceramic Ferrule Bore |
| |
| DOI：10.3969/j.issn.1671-5322.2005.03.008 |
| 中文关键词: 陶瓷插芯 表面质量 粗糙度 研磨 |
| 英文关键词: ceramic ferrule surface quality roughness grinding |
| 基金项目:国家自然科学基金 |
|
| 摘要点击次数: 4614 |
| 全文下载次数: 4154 |
| 中文摘要: |
| 陶瓷插芯是光纤连接器的部件,其市场需求正随着波分复用技术(WDM)的广泛应用而不断扩大,为了获得高质量的陶瓷烧结体,采用部分稳定氧化锆(PSZ)(Partially Stabilized Zirconia)作为插针材料.为了保证插芯对准时的可靠性以及获得低的插入损耗,对插针的精度和稳定性有很高的要求.主要介绍了一种对插针的坯体进行加工的加工方法(研磨抛光),研究不同的工艺参数对内孔加工质量(主要是粗糙度)的影响. |
| 英文摘要: |
| Ceramic Ferrule is the key component of Optical Connector. With the extensive application of WDM, its market demand is growing. To get high quality ceramic sinter, we use PSZ to manufacture the ferrule. To ensure the reliability of levelling the ferrules and get low inserting wastage, it is vital to gain high precision and stability. This paper mainly introduces a method(Grinding and polishing) to machining the ferrule roughcast and studies different technologic parameters’ influence on machining quality(mainly Roughness). |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |