|
| Al2O3-TiO2料浆流变性能的研究 |
| A Study of Rheological Behaviors of Al2O3-TiO2 Slurry |
| |
| DOI：10.3969/j.issn.1671-5322.2006.01.014 |
| 中文关键词: 悬浮体 流变性能 注凝成型 钛酸铝 |
| 英文关键词: suspension rheological behaviors gelcasting aluminium titanate |
| 基金项目:江苏省自然科学基金 |
|
| 摘要点击次数: 6630 |
| 全文下载次数: 5568 |
| 中文摘要: |
| 研究了研磨时间、分散剂掺量、固含量对Al2O3-TiO2料浆流变性能的影响.研究结果表明,当研磨时间为4 h,分散剂掺量为3%(mass fraction of solid)、固含量为45%(volume fraction)的条件下所制备的Al2O3-TiO2粘度仅为76 mPa·s,引入固化剂后固化时间为360 s.该料浆流动性能最佳,固化时间充裕,有利于注凝成型. |
| 英文摘要: |
| The effect of mill time,dispersant content and solid volume fraction on rheological behaviors of Al2O3-TiO2 slurry were investigated.The results showed that the viscosity of Al2O3-TiO2 slurry was only 76 mPa·s and the solidification time was 360s after adding solidified agent when the mill time was 4h,the additive of dispersant was 3%（mass fraction of solid）,and the solid volume content was 45%.And this slurry obtained the best fluid performance and abundant solidification time,was propitious to gelcasting. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |