|
| 基于布里渊散射的高频可调谐微波信号产生技术的研究 |
| Study on High Frequency Tunable Microwave Signal Generation Based on Brillouin Scattering |
| 投稿时间：2015-06-02 |
| DOI：10.16018/j.cnki.cn32-1650/n.201503012 |
| 中文关键词: 温度控制 布里渊散射 微波信号 |
| 英文关键词: Temperature Control Brillouin Scattering Microwave signal |
| 基金项目:江苏省高校自然科学研究基金(14KJB510034)；中国博士后科学基金资助项目(2015M571637) |
|
| 摘要点击次数: 4730 |
| 全文下载次数: 3627 |
| 中文摘要: |
| 为了获得高频可调谐微波信号，首先设计了一种基于MSP430F149单片机的温度控制系统，该控制系统通过温度传感器TMP112进行温度信息采集，驱动电路产生的PWM波信号驱动TEC芯片；其次，利用设计获得的温度控制系统，提出并验证了一种高频可调谐微波信号产生的方法:利用光纤布里渊散射放大效应获得多波长激光器；通过光纤滤波器滤波获得了高频微波信号输出；调节温度控制系统的驱动电压控制增益光纤的温度，获得22.055~22.121 GHz的可调谐微波信号。如果进一步改变控制系统的温度调谐范围可以获得更宽的微波信号输出。 |
| 英文摘要: |
| In order to obtain high frequency tunable microwave signal, firstly, the temperature control system based on MSP430F149 microcontroller is designed, and a digital temperature sensor of TMP112 is used to collect temperature information, TEC chip is derived by the generated Pulse Width Modulation(PWM)from the controlled circuit. Secondly, by using the temperature control system, a method obtained high frequency tunable microwave signal generation is proposed and experimentally demonstrated, multi wavelength laser is obtained by using the Brillouin scattering amplification effect in optical fiber, through the optical fiber filters the high frequency microwave signal is obtained. The temperature controller is used to control the temperature of the optical fiber, and by adjusting the temperature of the controller, the tunable microwave signal from 22. 055 to 22. 121GHz can be obtained. The tunable frequency range can be further expanded by using a temperature control system with a wider adjustment range. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|