|
| 某钢雨棚的设计分析及节点计算 |
| Design Analysis and Node Calculation of One Steel Canopy |
| 投稿时间：2020-06-30 |
| DOI：10.16018/j.cnki.cn32-1650/n.202003012 |
| 中文关键词: 钢雨棚 设计过程分析 节点计算 |
| 英文关键词: steel canopy design process with analysis hode caculation |
| 基金项目: |
|
| 摘要点击次数: 3580 |
| 全文下载次数: 3120 |
| 中文摘要: |
| 以7度区(0.10 g)某钢雨棚作为研究对象，重点分析了该钢雨棚的设计分析过程，对相关设计参数进行了介绍。对其中采用的铸钢节点进行计算分析，采用有限元方法进行计算分析得出铸钢节点的强度破坏、局部稳定破坏和节点的变形，并与设计规范进行复核，通过合理设置节点壁厚等措施，以满足设计要求。 |
| 英文摘要: |
| In this paper, a steel canopy in the 7 degree zone(0. 10 g)is taken as the research object. The design and analysis process of the steel canopy is mainly analyzed, and the relevant design parameters are introduced. The cast steel joint is calculated and analyzed. The strength failure, local stability failure and deformation of cast steel joints are calculated and analyzed by using finite element method, and the design specification is rechecked. The measures such as reasonable setting of joint wall thickness are adopted to meet the design requirements. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |