文章摘要
封闭多边形管全模态屈曲承载特征计算方法
Calculation Method for Full-mode Buckling Load Bearing Characteristics of Closed Polygonal Tubes
投稿时间:2025-01-15  
DOI:10.16018/j.cnki.cn32-1650/n.202502008
中文关键词: 屈曲特征  多边形管  模态叠加  承载力
英文关键词: buckling characteristic  polygonal tube  modal superposition  bearing capacity
基金项目:江西省交通运输厅科技项目(2023C0008)
作者单位
黄宇坤 赣州高速公路有限责任公司,江西赣州 341400 
胡艺川 赣州高速公路有限责任公司,江西赣州 341400 
熊世伟 江西省交投养护科技集团有限公司,江西南昌 330200 ;公路桥梁与隧道结构江西省重点实验室,江西南昌 330200 
朱泽文 江西省交投养护科技集团有限公司,江西南昌 330200 ;公路桥梁与隧道结构江西省重点实验室,江西南昌 330200 
王朗 安徽理工大学 土木建筑学院,安徽淮南 232001 
摘要点击次数: 40
全文下载次数: 20
中文摘要:
      为了让封闭截面管件的有限元模型更加贴近实际情况,往往在模型中引入屈曲模态作为结构的初始缺陷,诱发出与实际工况的变形模式相一致的有限元模型。但是有限元屈曲分析结果显示添加初始缺陷后的屈曲模态往往不能满足实际压溃模式的需求。本文对一组四边形闭合截面管件进行轴压试验,得出了闭合截面管件实际变形模式,提出了一种系数叠加的求解方法;通过屈曲模态的线性叠加,得出与实际变形模态一致的模态特征;将此法与相关文献的试验结果进行对比验证。结果表明:本文方法计算过程更加简单,求出的指标参数更接近实际情况,可拓性较强。
英文摘要:
      To make the finite element model of closed section pipe components more in line with the actual situation, the buckling mode is often introduced into the model as the initial imperfection of the structure, so as to induce a finite element model with a deformation mode consistent with the actual working conditions. However, the finite element buckling analysis results show that the buckling modes after adding initial defects often fail to meet the requirements of the actual crushing mode. In this paper, a group of quadrilateral closed-section pipe fittings are tested under axial compression, and the actual deformation mode of closed-section pipe fittings is obtained, and a solution method of coefficient superposition is proposed.Through the linear superposition of buckling modes, the modal characteristics consistent with the actual deformation modes are obtained.This method is compared and verified with the test results of relevant literatures.The results show that the calculation process of this method is simpler, and the obtained index parameters are closer to the actual situation, and the extension is stronger.
查看全文   查看/发表评论  下载PDF阅读器
关闭