|
| 吸扫式清扫车气力系统流场特性分析与结构参数优化 |
| Flow Field Characteristics Analysis and Structural Parameter Optimization of the Pneumatic System for Suction-sweeping Road Sweeper |
| 投稿时间:2025-10-22 |
| DOI:10.16018/j.cnki.cn32-1650/n.202504002 |
| 中文关键词: 吸扫式清扫车 气力系统 流场分析 结构优化 响应曲面法 |
| 英文关键词: suction-sweeping road sweeper pneumatic system flow field analysis structural optimization response surface methodology |
| 基金项目:国家自然科学基金项目(51405418) |
|
| 摘要点击次数: 78 |
| 全文下载次数: 28 |
| 中文摘要: |
| 为提高吸扫式清扫车的作业效率,本文基于ANSYS Fluent软件,建立清扫车核心气力系统的三维流场模型,再通过单因素仿真试验,分析吸管直径、吸盘结构参数、导流板角度等7个关键参数对吸尘性能的影响规律;采用Box-Behnken响应曲面法构建多目标优化模型,结合目标权重法进行参数优化。结果表明,结构参数最优值分别为:吸尘管直径165 mm、吸尘管长度1 581 mm、吸盘喇叭口高度155 mm、吸盘挡板倾斜角61°、吸盘宽度105 mm、导流板倾斜角130°、导流板高度89 mm;优化后吸盘近地面流速提升4.32%,负压提升16.03%,系统压力降降低8.56%,系统内部流场分布更加均匀,涡流现象显著减少。 |
| 英文摘要: |
| To improve the operational efficiency of suction-sweeping road sweepers based on ANSYS Fluent software, a three-dimensional flow field model of the sweepers core pneumatic system was established. Through single-factor simulation experiments, the influence of seven key parameters on suction performance was analyzed.A multi-objective optimization model was constructed using the Box-Behnken response surface methodology, and parameters were optimized in combination with the objective weighting method. The results indicate that the optimal values of the structural parameters are as follows:a dust suction pipe diameter of 165 mm, a dust suction pipe length of 1 581 mm, a suction cup bell-mouth height of 155 mm, a suction cup baffle inclination angle of 61°, a suction cup width of 105 mm, a deflector inclination angle of 130°, and a deflector height of 89 mm. After optimization, the flow velocity near the ground of the suction cup increased by 4.32%, its negative pressure increased by 16.03%, and the system pressure drop decreased by 8.56%. Furthermore,the internal flow field distribution became more uniform, and the vortex phenomenon was significantly reduced. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|