文章摘要
微型沟槽对翼型叶片性能影响的数值模拟研究
Numerical Simulation Study on the Influence of Micro-grooves on Airfoil Blade Performance
投稿时间:2025-09-24  
DOI:10.16018/j.cnki.cn32-1650/n.202504003
中文关键词: 微型沟槽叶片  翼型  减阻  流体  数值模拟
英文关键词: micro-grooved blade  airfoil  drag reduction  fluid  numerical simulation
基金项目:
作者单位
夏开金 南京师范大学能源与机械工程学院,江苏南京 210023 
李奇贺 南京师范大学能源与机械工程学院,江苏南京 210023 
摘要点击次数: 44
全文下载次数: 22
中文摘要:
      为研究微型沟槽对翼型叶片性能的影响效果,在叶片表面设计宽高比为1且无间隔的微型沟槽,并进行数值模拟计算,探究微型沟槽随来流速度变化和设计位置不同的减阻规律。结果表明:在来流速度为10~50 m/s时,相比于光滑翼型表面,微型沟槽叶片在沟槽位于叶片中段、宽高均为0.5 mm、来流速度为20 m/s时减阻效果最好,最高减阻率为13.95%。
英文摘要:
      To investigate the influence of micro-grooves on airfoil blade performance, micro-grooves with an aspect ratio of 1 and no spacing were designed on the blade surface. Numerical simulations were conducted to explore the drag reduction patterns of micro-grooves under varying incoming flow velocities and at different design locations. The results indicate that, when the incoming flow velocity ranges from 10 to 50 m/s, the micro-grooved blade achieves the best drag reduction effect under the conditions of grooves located in the middle section of the blade, with a width and height of 0.5 mm each, and at an incoming flow velocity of 20 m/s. The maximum drag reduction rate reaches 13.95%.
查看全文   查看/发表评论  下载PDF阅读器
关闭