文章摘要
自平衡条件下单箱三室箱形梁竖向挠度研究
Study on the Vertical Deflection of a Single-box Three-cell Box Girder Bridge Under Self-equilibrium Conditions
投稿时间:2025-09-19  
DOI:10.16018/j.cnki.cn32-1650/n.202504010
中文关键词: 能量变分法  自平衡条件  剪力滞后  单箱三室箱梁  竖向挠度
英文关键词: energy variational method  self-equilibrium condition  shear lag  single-box three-cell box girder  vertical deflection
基金项目:甘肃省科技重大专项项目(19ZD2GA002);2024年盐城工学院研究生创新计划项目(KYCX24_XZ047)
作者单位
刘浩然 盐城工学院 土木工程学院,江苏 盐城 224051 
甘亚南 盐城工学院 土木工程学院,江苏 盐城 224051 
唐洁茹 盐城工学院 土木工程学院,江苏 盐城 224051 
章文政 盐城工学院 土木工程学院,江苏 盐城 224051 
摘要点击次数: 39
全文下载次数: 19
中文摘要:
      综合考虑Timoshenko剪切变形、剪力滞效应和剪滞翘曲应力自平衡条件等因素,获得该类结构总势能;利用能量变分法推导出单箱三室箱形梁的弹性控制微分方程,继而实现该控制微分方程的求解;最后通过数值模拟进行验证,结果表明:箱梁竖向位移为欧拉梁理论、Timoshenko剪切变形、剪力滞和剪滞翘曲应力自平衡条件的叠加;在均布荷载下,箱梁跨径越小,剪切变形和剪力滞效应对箱梁竖向挠度的影响越大;集中荷载下,Timoshenko剪切变形对竖向挠度无影响,但剪力滞效应影响明显增加;本文推导理论值计算精度最高,且与有限元法计算值吻合较好,其误差皆在5%以内。
英文摘要:
      By considering factors including the Timoshenko shear deformation, the shear lag effect, and the self- equilibrium condition of shear lag warping stress, the total potential energy of the structure was obtained. The governing differential equation of the single-box three-cell box girder is derived via the energy variation method, and then the solution of this control differential equation is achieved. Finally, through numerical simulation, the results show that: The vertical displacement of the box girder can be expressed as the superposition of displacements attributable to the Euler beam theory, Timoshenko shear deformation, shear lag effect and the self-equilibrium condition of shear lag warping stress; Under uniform load, the smaller the span of the box girder, the greater the influence of shear deformation and shear lag effect on the vertical deflection of the box girder; Under centrated load, Timoshenko shear deformation has no effect on the vertical deflection, but the influence of shear lag effect increases significantly; The calculation accuracy of theoretical values derived in this paper is the highest, showing excellent agreement with those obtained by the finite element method, and all errors are within 5%.
查看全文   查看/发表评论  下载PDF阅读器
关闭