|
| 基于 Proteus 单片机系统设计 |
| Based on Proteus in Single Chip Computer System Design |
| |
| DOI：10.3969/j.issn.1671-5322.2009.01.017 |
| 中文关键词: Proteus 单片机 硬件电路 仿真 |
| 英文关键词: Proteus Single Chip Computer Hardware circuit simulation |
| 基金项目: |
|
| 摘要点击次数: 4571 |
| 全文下载次数: 3993 |
| 中文摘要: |
| 单片机系统设计包含硬件设计和软件设计两部分.传统的方法是先进行硬件设计,然后进行软件调试.当硬件电路不满足设计要求时,就需要修改硬件电路重新进行调试.Proteus是单片机系统仿真软件,当硬件电路不满足设计要求时,直接修改电路重新进行仿真,直到系统软硬件满足要求为止.使用Proteus软件对篮球比赛计分器系统进行设计和仿真,验证该设计的正确性和可行性. |
| 英文摘要: |
| Hardware design and software design are two parts in single chip computer system design.The traditional way is that software can be tested after hardware designn is completed.If hardware circuit can not meet the demands,it must be modified.After that,software will be tested on the modified hardware again.Proteus is the simulation software for Single Chip Computer System Design.Hardware circuit design and software design can be easily modified to meet the goal if hardware circuit cannot meet the demands.The design discribed in the paper of the electric count systen’s correction and utility is tested by using proteus software to design and simulate. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |